Skip to main content

Using Fusible Web for Applique

 


 

Hi all

I was hit with a sudden impulse to do some applique last weekend. The inspiration came from a free pattern landing in my inbox. It's for a Christmas table runner. So, I thought I'd give it a go. 

It's called "It's a Gnome Christmas Table Runner" and you can find it here. 

 

Only thing is today is Christmas Eve and I'm no where near finished yet.  But, then I knew when the applique buzz hit me, I wouldn't get it done in time for this Christmas. That's not going to stop me making it - there's always next year's table.

Anyway, my normal applique method is needle turn. This is where you turn the fabric edge of the applique underneath as you sew it to the backing fabric. I normally pop a safety pin or two in to hold it still, and then just keep it in place with my fingers as I sew.

This time, I thought I'd try Wonder Under. It's just one of the many fusible webs available for gluing fabric together. You can buy fusible web from any fabric retailer on and offline. 

This is the product I used:

Pellon 805 Wonder-Under Interfacing

 


Although the product did stitch the pieces to the fabric, it was fiddly to use. Peeling the backing fabric off can be tricky. Especially if the Wonder Under is close to the edge of the applique.  

I also managed to use it incorrectly. You're supposed to iron a large piece of the fusible web to your applique fabric before you cut the pieces out. I cut them out first which is probably why I ended up in a bit of a pickle. I lost count of the number of times the product stuck to things it wasn't supposed to. Like the cutting board and my iron. 

You can see how I got on over on youtube. Here are links to the two videos in the How to Applique Using Wonder Under series.




In the next videos, I'll be sewing the shapes to the backing fabric and showing you how to make a quilt sandwich. So make sure you subscribe to my YouTube channel to keep up.

In the meantime, have a Merry Christmas and Happy New Year!

Bye for now

Olly

Useful Quilting Tools:

Honey's Heaven Rotary Cutter Set



   

   QuiltCut UltraGrid Quilting Rulers

 

 
 
  
 
 

 
 
 
 
 
 

 
 
 
 
 
 

 
 
 
 
 

 
This article may contain Amazon associate links. I may earn a referral fee for any purchases made via these links. This does not cost you any extra, and there’s no obligation to use the links. Although, they do help support me and this blog.

The items showcased may be available from other suppliers if you prefer not to use the links.   
 
For more sewing tips and adventures, follow me:
YouTube

 

 



Labels:

Comments

Post a Comment

Popular posts from this blog

How To Keep The Original Hem When Turning Up Jeans

Hi all, You’ve found the perfect pair of jeans but as always, they are 3 miles too long. I’m going to show you how to fix them so they fit your leg length perfectly.  Better still, I’ll show you how this technique will work with any pants or trousers with an original jean-like hem. Like these 511 trousers. You will need : Pair of jeans or trousers that need turning up Sewing machine Zipper foot Thread to match your jeans/trousers Tape measure or ruler Safety pins or plastic clips Iron and ironing board Pressing cloth Step 1 Stand up and try on your jeans. With the shoes you usually wear or the pair you intend to wear with them. This is important as the shoes you wear will make a difference to the size of the turn up you need. Turn up the bottom of each leg so the wrong side of the hem is showing. Then move it up or down until you are happy with how they sit on the tops of your shoes. Fiddle with them, turning them up a bit more or do
Post a Comment
Read more

The Charity Shop Find & the Headache from Hell!

 Hi all I've always been a fan of charity shops. Even before they became a fashionable way to reuse or  repurpose other people's unwanted clutter.  To me, they have always been a gateway for feeding my addiction to vintage and antique sewing machines.  Like this one.  Isn't she a beauty? According to the markings, She is a New Home machine made in West Germany so I'm guessing she's a post war... maybe 1950s... electric sewing machine.    She has a bolt-on motor and the shortest electric cable I have ever seen on a sewing machine! Look at it! It's tiny! That's never going to reach any of my electrical outlets. I'm thinking that this vintage sewing machine was made to be in a cabinet... or a previous owner cut the cable for some reason.  Maybe their outlets were mounted on a desk and they didn't want long cables cluttering the workspace?  Who knows? One thing I do know, is this sewing machine is going to give me a little bit of a headache!    Why? Beca
Post a Comment
Read more

A soft spot or OSMC

Hi there,  I was having a bit of a nose around a local second hand shop over the weekend and came across this: It was tucked down the side of some furniture, looking a bit sorry for itself, just sitting there all alone. Well, I couldn't leave it there.  Poor thing looks like its had a bit of a hard life. It's a Mundlos machine, originally designed to go on a treadle table judging by the lack of a tool compartment, little holes in the base just under the hand crank and the small groove just behind the wheel. The little holes and groove would have been for the belt attaching the machine to the pedal.  The tools would probably have been kept in the table. The golden badge is the Mundlos company's trade mark and the portrait is of Heinrich Mundlos, one of the company's founders.  The little switch to the side is a handy little gadget that pops the shuttle out of the bobbin compartment. Originally, this machine would have been decorated with dec
2 comments
Read more