Skip to main content

Too Many Starts and Not Enough Ends

I can't believe it's the middle of May already.  It's been a hectic few months and I haven't had much time for doing any stitching. I've recently moved house - again.  That makes twice in a little over a year.  So it's been a busy few months of packing boxes and then unpacking boxes at the other end. 

I thought I'd give you a quick update on the stuff I was working on before I moved. My stitching stuff was among the first bits to get packed up so I haven't had a chance to look at any of these since the end of February!

First up, my little lion:

Last time I worked on this, I was concentrating on filling in the gaps in his body.

Next up a half knitted sock:


Well, its more like less than a quarter of a sock really. 

And lastly,  poor old Winnie The Pooh:

I've made no progress whatsoever with him.  I got off to a flying start as its such an easy kit. The bit above only took an evening so I was sure I would have this finished in no time. It's easy to see the different shades in the colours and it's on 14 count aida so the holes are easier to see.  I can't really blame the lack of progress on moving house as I'd stopped working on him before that.  He just isn't grabbing my attention. 

Just lately it seems that I am starting more projects than I am completing. I'm going to need to knuckle down and get some of these projects finished or I'm going to get swamped under a pile of UFOs!

Bye for now

Olly

Comments

Popular posts from this blog

How To Keep The Original Hem When Turning Up Jeans

Hi all, You’ve found the perfect pair of jeans but as always, they are 3 miles too long. I’m going to show you how to fix them so they fit your leg length perfectly.  Better still, I’ll show you how this technique will work with any pants or trousers with an original jean-like hem. Like these 511 trousers. You will need : Pair of jeans or trousers that need turning up Sewing machine Zipper foot Thread to match your jeans/trousers Tape measure or ruler Safety pins or plastic clips Iron and ironing board Pressing cloth Step 1 Stand up and try on your jeans. With the shoes you usually wear or the pair you intend to wear with them. This is important as the shoes you wear will make a difference to the size of the turn up you need. Turn up the bottom of each leg so the wrong side of the hem is showing. Then move it up or down until you are happy with how they sit on the tops of your shoes. Fiddle with them, turning them up a bit more o...

The Charity Shop Find & the Headache from Hell!

 Hi all I've always been a fan of charity shops. Even before they became a fashionable way to reuse or  repurpose other people's unwanted clutter.  To me, they have always been a gateway for feeding my addiction to vintage and antique sewing machines.  Like this one.  Isn't she a beauty? According to the markings, She is a New Home machine made in West Germany so I'm guessing she's a post war... maybe 1950s... electric sewing machine.    She has a bolt-on motor and the shortest electric cable I have ever seen on a sewing machine! Look at it! It's tiny! That's never going to reach any of my electrical outlets. I'm thinking that this vintage sewing machine was made to be in a cabinet... or a previous owner cut the cable for some reason.  Maybe their outlets were mounted on a desk and they didn't want long cables cluttering the workspace?  Who knows? One thing I do know, is this sewing machine is going to give me a little bit of a headache!...

A soft spot or OSMC

Hi there,  I was having a bit of a nose around a local second hand shop over the weekend and came across this: It was tucked down the side of some furniture, looking a bit sorry for itself, just sitting there all alone. Well, I couldn't leave it there.  Poor thing looks like its had a bit of a hard life. It's a Mundlos machine, originally designed to go on a treadle table judging by the lack of a tool compartment, little holes in the base just under the hand crank and the small groove just behind the wheel. The little holes and groove would have been for the belt attaching the machine to the pedal.  The tools would probably have been kept in the table. The golden badge is the Mundlos company's trade mark and the portrait is of Heinrich Mundlos, one of the company's founders.  The little switch to the side is a handy little gadget that pops the shuttle out of the bobbin compartment. Originally, this machine would have been decorated with ...