Skip to main content

A New Challenge



I bought this book on a bit of an impulse. I love the colour and design of the wrap on the front cover.  I also like a couple of the bags that are in there as well.

My mum would have knitted this wrap up in no time, but unfortunately, she is no longer with us.  So, if I want a wrap like this one I'm going to have to knit it myself.

There is just one slight technical hitch though.  I don't really know how to knit. I know the knit stitch and sort of know the purl stitch - but that's it.

Still, I'm not one to pass up a challenge.  How hard can it be?


I've had a look through the instructions. It tells you what wool to use, what size needles and even what gauge to keep to.  This pattern is 5.5 sts & 7 rows to 4in over st.st  on size US 35 (20mm).  Umm... so far sort of OK.  Well, I know that 20mm is the needle size so that's a good place to start.   There are also a few SKPOs, PFBs, and YOs in there.   Isn't YO another way to say hello? 

I had a re-think and decided to start with something a wee bit simpler.  A nice scarf.  I found a nice easy pattern on the internet which just said cast on 50 stitches then knit 2, purl 2 and do as many rows as you like.  What could be easier than that?



So armed with some Mohair-Look wool and a set of 5.5mm needles I started on the scarf. 

After each row of knit 2, purl 2, I noticed that instead of 50 stitches, I was getting an extra 20.  That's not good I thought.  So I unravelled it all and started again.  I must have done this 8 times before I decided to deviate from the pattern a little. 

So here is the scarf so far, knitted throughout in plain knit stitch.  Its growing nicely and best of all I still only have 50 stitches! Yea!


The tension is a bit suspect in places where I've gone from a bit too tight to a bit too loose.  It feels lovely and soft though and I can feel the warmth in the wool already. I've been working on this since Sunday morning...

...I think it's going to take me a while to get to the wrap!

Bye for now

Olly




  

  

Comments

Popular posts from this blog

How To Keep The Original Hem When Turning Up Jeans

Hi all, You’ve found the perfect pair of jeans but as always, they are 3 miles too long. I’m going to show you how to fix them so they fit your leg length perfectly.  Better still, I’ll show you how this technique will work with any pants or trousers with an original jean-like hem. Like these 511 trousers. You will need : Pair of jeans or trousers that need turning up Sewing machine Zipper foot Thread to match your jeans/trousers Tape measure or ruler Safety pins or plastic clips Iron and ironing board Pressing cloth Step 1 Stand up and try on your jeans. With the shoes you usually wear or the pair you intend to wear with them. This is important as the shoes you wear will make a difference to the size of the turn up you need. Turn up the bottom of each leg so the wrong side of the hem is showing. Then move it up or down until you are happy with how they sit on the tops of your shoes. Fiddle with them, turning them up a bit more or do

The Charity Shop Find & the Headache from Hell!

 Hi all I've always been a fan of charity shops. Even before they became a fashionable way to reuse or  repurpose other people's unwanted clutter.  To me, they have always been a gateway for feeding my addiction to vintage and antique sewing machines.  Like this one.  Isn't she a beauty? According to the markings, She is a New Home machine made in West Germany so I'm guessing she's a post war... maybe 1950s... electric sewing machine.    She has a bolt-on motor and the shortest electric cable I have ever seen on a sewing machine! Look at it! It's tiny! That's never going to reach any of my electrical outlets. I'm thinking that this vintage sewing machine was made to be in a cabinet... or a previous owner cut the cable for some reason.  Maybe their outlets were mounted on a desk and they didn't want long cables cluttering the workspace?  Who knows? One thing I do know, is this sewing machine is going to give me a little bit of a headache!    Why? Beca

A soft spot or OSMC

Hi there,  I was having a bit of a nose around a local second hand shop over the weekend and came across this: It was tucked down the side of some furniture, looking a bit sorry for itself, just sitting there all alone. Well, I couldn't leave it there.  Poor thing looks like its had a bit of a hard life. It's a Mundlos machine, originally designed to go on a treadle table judging by the lack of a tool compartment, little holes in the base just under the hand crank and the small groove just behind the wheel. The little holes and groove would have been for the belt attaching the machine to the pedal.  The tools would probably have been kept in the table. The golden badge is the Mundlos company's trade mark and the portrait is of Heinrich Mundlos, one of the company's founders.  The little switch to the side is a handy little gadget that pops the shuttle out of the bobbin compartment. Originally, this machine would have been decorated with dec